Seite 1 von 1

Fader wird bei Nutzung selektiert.

Verfasst: 14.05.2019, 18:54
von lightman81
Hallo zusammen,
seit dem letzten Update wird der Fader selektiert, der zuletzt bewegt wird.
Kann ich diese Funktion irgendwo ausschalten, ich möchte selbst entscheiden welcher Fader selektiert ist.
Leider habe ich im Setup nichts gefunden.

Danke im Voraus.

Viele Grüße

Thomas Sommer

Re: Fader wird bei Nutzung selektiert.

Verfasst: 12.12.2019, 13:19
von just-lights
19.3. Viewing Cues and Cue Stacks
The Cue and Cue Stack Windows are used to monitor and adjust the execution of Cues and Cue Stacks respectively. Both windows monitor the currently selected playback.

For a Cue Stack with a single Cue recorded on it, then the Cue Stack window will not be of much interest. In this case the Cue can be monitored and adjusted using the Cue Window.

For a Cue Stack with multiple Cues, the Cue Stack window can be used to watch the progress of the Cue Stack. The position within the Cue Stack can be changed along with the timing information. You can make the Cue Stack window follow the Cue currently executing on the selected playback - set the Display Current Cue option to YES in the Cue Stack Window.

Zum Ausschalten der Funktion:
set the Display Current Cue option to NO[/b

Re: Fader wird bei Nutzung selektiert.

Verfasst: 12.12.2019, 13:28
von C. Conrad
Moin,

ich glaube der Threadersteller meinte wohl eher folgende Funktion:

SETUP -> VIEW SETTINGS -> PLAYBACK -> Current playback follows last touched

Diese einfach auf "no" stellen und das Problem sollte erledigt sein. ;-)

Viele Grüße,
Christian